JIANGSU HAOHUA INDUSTRY GROUP

Home
About Us
Products
High Alloy Materials
Process
Equipment
Technology
Standards
Inspection
Quality Assurance
Market
Contact Us
Products

Austenitic Stainless Steel Pipe

Your position: Home > Products > Stainless Steel Pipes > Austenitic Stainless Steel Pipe > ASTM A213 TP309S Heat Resistant Stainless Steel Seamless Tube

ASTM A213 TP309S Heat Resistant Stainless Steel Seamless Tube

CONSULTATION SEND E-MAIL
  • ASTM A213 TP309S Heat Resistant Stainless Steel Seamless Tube

Product Information

 

ASTM A213 TP309S Heat Resistant Stainless Steel Seamless Tube

309S Stainless Steel Seamless Pipe - We are one of the leading exporter, manufacturers and Suppliers in all Stainless Steel Seamless & ERW Pipes of Grades 304, 304L, 316, 316L, 321, 309, 310, 316 Ti, Duplex and also Hastealloy Pipes.

309S Pipe are austenitic chromium-nickel stainless steel that provide excellent corrosion resistance and heat resistance plus good strength at room elevate temperatures. Type 309S is identical to type 309 except for a lower carbon content that minimizes carbide precipitation and improved weld ability. They are essentially non-magnetic as annealed and become slightly magnetic when cold worked.

309 is a highly alloyed austenitic stainless steel used for its excellent oxidation resistance, high temperature strength and creep resistance.

The lower nickel content of 309 improves resistance to sulphur attack at high temperatures. It is tough and ductile, and can be readily fabricated and machined. 309S is the low-carbon version of 309, and is recommended for applications where sensitization, and subsequent corrosion by high temperature gases or condensates during shutdown may pose a problem. 309 is manufactured to ASTM A 167 and 309S to ASTM A240 specifications.

Typical Applications
309 / 309S is used exclusively for its high temperature oxidation resistance. It is common for 309, 310 and 321 to be used in the same piece of equipment in the various temperature regions.
Chemical Composition (ASTM A240)
 


SX

C

Mn

P

S

Si

Cr

Ni

309


309S

0.20 max


0.08 max

2.00


max

0.045


max

0.030


max

1.00


max

22.0


24.0

12.0


15.0


Typical Properties in the Annealed Condition
The properties quoted in this publication are typical of mill production and unless indicated should not be regarded as guaranteed minimum values for specification purposes.
 

1. Mechanical Properties at Room Temperature
 

 

SX 309

SX 309S

 

TYPICAL

MIN

TYPICAL

MIN

Tensile Stength MPa

560

515

540

515

Proof Stress (0.2% Offset) MPa

285

205

280

205

Elongation
(Percent in 50 mm)

54

40

54

40

Hardness (Brinell)

164

 

159

 

Endurance (fatigue) limit MPa

260

 

260

 

Consultation

Product Name: *
Your Name: *
Your Tel: *
Your Mail: *
Your Country: *
Inquiry: *

Friendly link

Contact us