ASTM A312 TP410S stainless steel U bend tube
'U' Bend Stainless Steel Tubes are manufactured in our plant as per the customer requirements. Bends can be Heat Treated in accordance with Clients' requirements followed by hydrostatic testing and dye penetrant testing if required.
U bent tubes are widely used in heat-exchanger systems. Heat exchanger equipment on the basis of stainless U-tube is essential in strategically important and critical fields nuclear and petrochemical machine building.
U-tube heat exchangers Designed for high temperature applications, especially steam condensing or hot oil systems. Thïs model is selected when differential expansion makes a fixed tube sheet exchanger unsuitable and when conditions preclude a floating head type (HPF) selection.
Surface condition Finished U-tubes shall be free of scale, without scratches after bending
Dimensional tolerances U tubes acc. to TEMA R.C.B.
1) Length of straight part -0/+5 mm
Flattening (also called “ovality”) at the bend shall not exceed 10% of the nominal tube outside diameter.
Wall thickness in bending part acc. to TEMA R.C.B 2.31
2) Minimum tube wall thickness in the bend part (T min)T(min) ≥ (SW × (2×R + D))/( 2× (R+D)
where: SW is smallest wall thickness
D Nominal outside diameter
R radius
3)Radius tolerance
1) for R 100 mm +/- 3 mm
2) for R ≥ 100 mm +/- 5 mm
4). Straightness tolerance max. 1,5 mm per 1 m
U-Tube ends: plain, vertically cut to the tube axis
Tubes OD in mm can be bent upon agreement: 15.8 16.0 17.0 18.0 19.05 20.0 21.3 25.4 26.7 31.8 32.0 38.1mm
Initial Length
Maximum lengths of 27000mm can be supplied on request
Bending radius
Minimum: 1.5×OD
Maximum: 1500 mm
The dimensions for heat exchanger tubes in special grades may differ from the above,please contact us.
Our Tube-bending production line, installed at 2007, will allow to produce U-tubes as per standards:
1. ASTM A688/A688M-15 Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes
2. ASTM A803/A803M-12 Standard Specification for Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes
3. ASTM A556/A556M-12 Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
Main Testing Terms and Procedure:
